New

CreatBot F430 – 400*300*300mm

Categoría:

Descripción

 

PRINTING
Print TechnologyFused Deposition Modeling
Build Volume400*300*300 mm
Number of NozzleDual
Layer Resolution0.02mm
Filament Diameter1.75 mm
Nozzle Diameter0.4mm (0.3, 0.5, 0.6, 0.8, 1.0mm)
TEMPERATURE
Max. Nozzle Temp.420°C
Max. Bed Temp.110°C
Max. Cabinet Temp.70°C
SPEED
Best Printing Speed55 mm/s
Max Printing Speed180 mm/s
Max Travel Speed200 mm/s
MECHANICAL
ConstructionPower-Coated Steel, Aluminum Casting

for Motion Components, POM

Build PlateMicrocrystalline Ceramic Panel
Build Plate LevellingAutomatic
ExtruderDirectly Drive
X Y Position Precision12.7 Microns
Z Position Precision1.25 Microns
ELECTRICAL
Power Requirements100-240V, 50-60HZ
Max. Power300W
Screen4.3 inch Color Touch Screen
ConnectivityUSB
SOFTWARE
Software BundleCreatWare Muti-Language
Support SoftwareSimplify3d, Cura, Slic3r, etc.
Supported File TypesSTL, OBJ, AMF
Operating SystemsWindows (7,8,10) Mac OS X
SPECIAL FUNCTION
Outage RestoredSava data when power is off
Filament DetectionPause printing when filament run out
Automatic ShutdownTurn off the power automatically when printing is complete

 

Product Description

Features

1. Support 420°C Hotend
We are the first one to publish 420°C high temperature nozzle to 3d printer market. This kind of nozzle allow to print with a variety of filaments. The nozzle height can also be micro adjusted. (Normal version for 260°C, PEEK version for 420°C.)

2. High Precision & High Speed

F430 3d Printer Precision Up to 0.04 mm

F430 3d Printer Speed Up to 120 mm/s

We exclusively research and develop the extruder feeding system and guide rail, which support high-speed printing. Its printing accuracy can reach high to 0.04mm,and it allows to extrude filament steady without block.

3. Stability
The whole-steel body not only ensure the stability when printing, but also extend the usage period greatly. Its optimization and cooperation of overall structure ensure the sustainable and efficient operation. The first batch of CreatBot 3D printers have been working for 5 years and more than 8000 hours.

4. Fully Enclosed High-Temperature Chamber
Fully enclosed chamber can block all external interference and reduce noise. Hot chamber can provide constant room temperature so that model won’t deform when printing.

5. Outage Restored & Filament Detection
The printer will automatically memorize the current position and save print data. Lower the platform and withdraw filament when power off suddenly. It will continue to print from the last stopped point after power’s on.

The printer will avoid invalid printing by stoping print and warning when filament runs out.

6. Touch Screen
The printer have all-English-menu touch screen which is easy operate and friendly use. One key to warm,one key to print as well as many other shortcut keys.

7. Efficiently Platform & 130°C Hotbed
The hotbed is made of heatable aluminium PCB, which can be heat up to 130°C fast. The platform is attached with 3d printing stickers buildtak. Printed object can be stick on the buildtak tightly and won’t get deformed.

8. Air Filter System
The air filter system can adsorb impurities and gases that generated by printing special filament, more safe and environmental protection which is more suitable for house, school, office space.

9. Automatic Leveling Platform
Use of 25 points through the probe to save the level of platform flatness data at the initial, through the Z axis intelligent compensation table height in the printing process to achieve fully automatic leveling.

Application

APPLICATION

The standard F430 are able to print PLA, ABS, Nylon, etc. perfectly. The F430-PEEK versionapplied to 3D printing of PEEK. We supply high quality PEEK filament as well, which requires420°C extruder temperature. PEEK material is high strength, high toughness, corrision resistance and wear resistance. It can be used in aerospace, electronics, medical, machinery, auotomotive and other industries.

Certifications

Creatbot F430 3d printer got many cetifications:

International Certification:
1. CE
2. FCC

China Patent:
1. 3D Printer New Dual Extruder
2. 3D Printer Lighting Apparatus
3. 3D Printer Anti-clogging Extruder
4. 3D Printer New Extruder Structure
5. Intelligent High Temperature Extruder

Software Copyright:
1. Filament Detection
2. Color Touch Screen
3. Power Management
4. 9 Keyboard Controlling
5. Power Outage Restored
6. CreatWare Software V6.4.3